9.3 Erasing Records from the Notepad
To erase all records from the Notepad:
1. Select the Notepad menu ( →→ F2:Notepad).
2. Select F2:Erase from the menu.
3. The WP-80 now asks if you are sure that you wish to erase all
records…
Erase, You Sure?
F1:Yes F2:No
4. Press to erase all records from the Notepad.
Press to quit without erasing the records from the Notepad.
9.4 Printing Records from the Notepad to the RS232 Port
This function is only available when the optional RS232 port is fitted.
1. Connect one end of the RS232 cable to the Charger/RS232 socket of
the WP-80. The charger, optional solar panel, or optional car battery
lead can be connected into the spare socket on the cable for long
term use, if required.
2. Connect the other end of the RS232 cable to an RS232 Printer, or to
COM1 or COM2 of a PC.
3. Ensure that the baud rate for the printer or PC and the WP-80 are the
same.
If necessary, alter the baud rate of the WP-80 (see section 11.1).
The WP-80 uses XON/XOFF protocol. Ensure that the printer is set
accordingly.
4. Select the Notepad menu ( →→ F2:Notepad).
5. Select F3:Print from the menu.
Printing starts as soon as is pressed. The display shows the word
“Printing” until printing is completed.
To Next Page
Loading...
Need help?
General
