TPS WP-80 User Manual

Page 18
7.3 Calibration Messages
1. If a temperature calibration has been successfully performed, the
WP-80 will display the following message and the offset value of the
probe. For example:
Calibrate OK
Offset= 1.0
2. If a temperature calibration has failed, the WP-80 will display the
following message, and the failed offset value of the probe. For
example…
Calibrate Failed
Offset= 10.5

TPS WP-80 Specifications

General

Brand	TPS
Model	WP-80
Category	Measuring Instruments
Language	English