TQ KTX2 User Manual

TQ Aviation KTX2.0300
EASA.AP445 MAN
KTX2.A-MAN.0202.en.docx Page 12 of 49
© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.
2.1.1. Controls
Key Designation Function
ON/OFF
Push = ON. This switch is mechanically locked until it
is pushed a second time.
VFR
Activate/deactivate VFR Squawk
(press shortly)
Store the standby Squawk as VFR/VFRW-
Squawk (press button 3 s) see chapter “2.6 VFR –
Squawk”.
CHANGE
1. Exchange of the active and standby-Squawk
2. Works as cursor back button when entering values
and also for navigating backwards through the con-
figuration menu.
IDENT
„Squawk Ident“, sends Ident marking (SPI) for 18s (in
normal mode) see chapter. “2.9 Flight- ID (FID) &
Set-Up”
MODE
Select Transponder-Mode ACS, A-S or
Standby (see chapter “2.4 Transponder-
Modes”)
Rotary knob
1. Enter values at current cursor position, select op-
tions; set standby Squawk
2. Works as cursor forward button when entering
values and also for navigating forward through
the configuration menu.
Figure 2: Controls

TQ KTX2 Specifications

General

Brand	TQ
Model	KTX2
Category	Marine Radio
Language	English