TQ KTX2 - Errors and Warnings; Setup Error; Critical Errors

TQ Aviation KTX2.0300
EASA.AP445 MAN
KTX2.A-MAN.0202.en.docx Page 36 of 49
© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.
4. Errors and Warnings
The KTX2 distinguishes 3 types of anomalies:
• Warnings
• Setup Errors
• Elementary Function Errors
4.1. Setup Error
If no FID-Code (Flight ID) and the corresponding Aircraft Address (AA-Code) is entered or
uncomplete, the following displays will appear after switching on the transponder:
Enter appropriate FID and AA-Code in accordance with chapters 3.1.2 and 3.1.3.
Note:
As long no FID / AA is set, the transponder will operate in A/C mode only.
4.2. Critical Errors
In case a critical error is present, the following messages can appear: