TQ Aviation KTX2.0300
EASA.AP445 MAN
KTX2.A-MAN.0202.en.docx Page 24 of 49
© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.
3.1.
Entering
Set
Up
To enter setup mode, press ID button during system startup.
The following menu appears:
Rotation of the rotary knob moves to the desired menu item.
Pushing the rotary knob selects the desired parameter to be modified.
3.1.1. Display brightness
Push the rotary knob to enter brightness sub menu.
Turning the rotary knob changes the value for brightness between 1 (lowest) to 5 (highest).
When selection is done, turn rotary knob to move cursor to “Adjust Brightness.” and leave
menu by pushing the rotary knob.
To Next Page
Loading...
