TQ Aviation KTX2.0300
EASA.AP445 MAN
KTX2.A-MAN.0202.en.docx Page 33 of 49
© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.
• Longitudinal offset: Enter the distance in meters of the GPS antenna from the NOSE
of the aircraft.
• Lateral offset: Enter the lateral distance of the GPS antenna from the longitudinal
(Roll) axis of the aircraft. For most small aircraft “00” is correct. In case an antenna
offset is applicable, the position to the left side of the aircraft will require a negative
sign, to the right a positive sign.
When the correct value has been entered, leave the menu by moving the cursor to the upper
line by rotating the rotary knob and push.
3.1.5. Modify VFR
In setup mode, move to “Modify VFR” by rotating the rotary knob and push to enter the
submenu.
The following menu appears:
Pushing and rotating the rotary knob selects and modifies the digits.
Note:
Make sure, that you enter the correct VFR Squawk for the particular country where your air-
craft is operated.
Examples:
Germany: VFR Squawk = 7000
USA: VFR Squawk = 1200
To Next Page
Loading...
Need help?
General
