TR-Electronic 110 Series - Additional Safety Instructions; Definition of Symbols and Instructions; Organizational Measures

Printed in the Federal Republic of Germany  TR-Electronic GmbH 2005, All Rights Reserved
07/30/2020 TR - ECE - BA - DGB - 0039 - 14 Page 63 of 107
2 Additional safety instructions
2.1 Definition of symbols and instructions
means that death or serious injury can occur if the required
precautions are not met.
means that minor injuries can occur if the required
precautions are not met.
means that damage to property can occur if the required
precautions are not met.
indicates important information or features and application
tips for the product used.
2.2 Organizational measures
• This User Manual must always kept accessible at the site of operation of the
measurement system.
• Prior to commencing work, personnel working with the measurement system
must have read and understood
- the assembly instructions, in particular the chapter “Basic safety
instructions”,
- and this User Manual, in particular the chapter “Additional safety
instructions”.
This particularly applies for personnel who are only deployed occasionally, e.g. at the
parameterization of the measurement system.