TR 900 - User Instructions: Cleaning System (TR 900); Cleaning Procedure; Detergent Mixture and Action Time; Rinsing the Tub

Hygiene Equipment
Designed for People
32
User instructions
All TR 900 – Cleaning (-C)
- Use the cleaning unit to clean the tub after each use.
- Grab the Cleaning handle and hold it over the tub.
- Open the Cleaning Safety valve with the key (turn counterclockwise).
- The cleaning detergent is mixed with cold water to minimize inhalation.
- The mixture of cleaning detergent is factory pre-set to approximately 2%.
- Spray the tub with cleaning detergent and let it act for 2-5 minutes.
- Close the Cleaning safety valve (turn clockwise) and put the Cleaning handle in the bracket.
- Use the shower to rinse the tub with fresh water.
Cleaning safety valve
Cleaning
shower hose
Cleaning
handle
Lid for 1.5L Cleaning container
Warning
Never use the Cleaning on patients. Only on equipment.