Tracker Off-Road 800SX - Page 45

43
MOD191
3. Remove the four cap screws securing the door hinge
and remove the door hinge; then remove the remain-
ing cap screws securing the side panel; then remove
the side panel.
MOD595
MOD192
INSTALLING
1. Position the cargo box into the up position; then rein-
stall the cap screws behind the rear ROPS mounting
point.
MOD190
2. Reinstall the three cap screws from inside the
behind-the-seat storage box panel.
MOD191
3. Position the door hinge into place; then reinstall the
four cap screws securing the door hinge; then rein-
stall the remaining cap screws securing the side
panel; then reinstall the rear inner fender.
MOD595
MOD192