3
7.4 Preparing your print bed 39
7.5 Removing a print from the bed 40
7.6 Remove support material or brim 41
8. Maintenance 42
8.1 Maintenance schedule 42
8.2 Change the print head 43
8.3 Change the bed plate 47
8.4 Dimensional accuracy calibration 48
8.5 Material usage and storage 50
8.6 Clean the 3D printer 51
8.7 Check all arms 51
8.8 Clean the print head and nozzle 52
8.9 Clean the Bowden tube 53
8.10 Clean the slide wheels 55
8.11 Check tension and wear of belts 56
8.12 Check if print head fan is running after heating up 57
8.13 Clean or replace the feeder/extruder motor 57
9. Troubleshooting 60
9.1 Unclog a print head 60
9.2 Print quality issues 61
To Next Page
Loading...
