TracVision M3 - Page 50

TracVision M3 User’s Guide
54
Chapter 5 - Troubleshooting
4. Press MENUS until the display shows “TRACKING
PARAMS.”
5. Press CHANGE until the display shows “TRACKING
PARAMS= YES.”
6. Press ACCEPT.
7. Press CHANGE until the display shows the satellite
you need to modify.
ENTERING DIAGNOSTICS
SYSTEM RESET= NO
NEXT MENU CHANGE
TRACKING PARAMS= NO
NEXT MENU CHANGE
TRACKING PARAMS=YES?
CHANGE ACCEPT
CALIBRATING GYRO
AZ: EL:
SATELLITE=ASTRA1?
CHANGE ACCEPT