Trakm8 T8 - General Wiring Notes and Best Practices

Trakm8 Install Ford Transit
Version 1.0
The AA Signs– Company Confidential
Page 26 of 27
• All wires not used on the
T8 loom are to be cut to
different lengths
(staggered and not
touching) and then
wrapped using electrical
insulation tape
• All soldered connections
are also required to be
wrapped securely using
electrical insulation tape
• Cables not used and
long lengths, should be
stowed neatly and
secured using electrical
tape as shown in this
image.
• Power supply is not to
be taken from the OBD
socket!
Wiring Notes