Trane Technologies X1351152701 - Page 15

BAS-SVX10F-EN 15
Installation and Configuration: Display Sensor
• Press or to move to the next menu (as illustrated).
Setting Configuration options
Temperature
• Choose Fahrenheit or Celsius
• Choose the degree resolution
(wh
ole degrees, half degrees, or
tenths of degrees)
Setpoint
Deadband (available for dual
setpoint system only)
Note: Deadband refers to the
minimum difference between
the heating and cooling
setpoints.
System
a) Single setpoint
System (continued)
b) Dual setpoint
c) No setpoint
. .
.
.
.
.
dual setpoint
no
i
single
i
.
heat/cool setpoint offset
(1.8˚F – 10.8˚F, 1˚C – 6˚C)
heat/cool setpoint offset
2ºF – 10.8ºF, 1.1ºC – 6ºC
emergency heat/
heat/cool/off
heat/cool/
auto/off
emergency heat/
heat/cool/auto/off
no system
options enabled