Trane ADAPTIVE CONTROL UCM-CLD - Page 19

19
An informational warning occurred
but has cleared “Press (Next)”
Next
No active diagnostics present
“Press (Next) (Previous) to continue”
Next
No
Are there diagnostics
in history ?
Yes
Diagnostic status report follows
“Press (Next) (Previous) to continue”
Next
Last diagnostic:
[DIAGNOSTIC DESCRIPTION]
Next
Next
[DIAGNOSTIC DESCRIPTION]
[DIAGNOSTIC TYPE]
No historic diagnostics present
“Press (Next) (Previous) to continue”
Next
Press (Enter) to
clear diagnostic history
Next
Press (Enter) to
reset circuit 1 diagnostics
Next
Press (Enter) to
reset circuit 2 diagnostics
Next
Press (Enter) to reset control
and clear all active diagnostics
Next
Next
Press Enter or Next
Enter
Machine will unload if loaded and
display will automatically return to
“MODE” in the chiller report.