Trane Air-Fi WCS-SB/R - Page 13

BAS-SVX40K-EN
13
Table 3. Minimum firmware level required for devices on an Air-Fi network
Device One or no WCSs
Multiple WCS-SB, or -SD and/
or an RH sensor module
(WCS-SH)
WCS-SO/SCO
2
WCS-SB/R
Tracer SC V3.6.xxx N/A N/A N/A
UC210 All versions V2.00.xxx.mod V3.0 V3.0
UC400 V6.00.xxx.mod V8.00.xxx.mod V9.0 V9.0
UC600 V4.00.xxx.mod V5.00.xxx.mod V6.0 V6.0
BCI-I V25.00.xxx.mod V28.00.xxx.mod
Not supported
(a)
Not supported
BCI-R V5.02.xxx.mod V6.00.xxx.mod V7.0
Not supported
RTRM
V12 or higher (requires physical
board replacement)
N/A N/A N/A
Tracer TU V8.2 V8.6 V9.3 V9.3
TU Adapter
V1.00.xxx.mod N/A N/A N/A
WCI V1.00.000.mod V2.00.000.mod V2.01.004.mod V2.01.004.mod
Tracer SC+ V5.1 V5.1 V5.1 V5.1
BCI2-I All versions All versions
Not supported
(a)
Not supported
BCI2-R All versions All versions All versions
Not supported
BCI2-C N/A N/A N/A N/A
Symbio™ 210/210e
All versions All versions All versions All versions
Symbio™ 400/500
All versions All versions All versions All versions
Symbio™ 700
All versions All versions All versions All versions
Symbio™ 800
All versions All versions All versions All versions
(a)
The WCS-SO/SCO
2
sensor can be installed in another controller in the building and referenced by the BCI-I/BCI2–I.
Overview