26
WSHP-SVX014J-EN
Weights
Table 17. Unit weights DXH 2 to 6 tons (Approximate)
DXH Shipping Weight
with pallet (lbs)
Unit Weight
without pallet (lbs)
024 393 269
036 458 313
048 560 381
060 613 434
070 613 434
Table 18. Unit weights DXVG 2 to 6 tons
(Approximate)
DXV Shipping Weight
with pallet (lbs)
Unit Weight
without pallet (lbs)
024 296 236
036 342 279
048 419 354
060 440 371
070 506 437
Table 19. Unit weights EXVG 0.75 to 6 tons
(Approximate)
EXV (60 Hz)
Shipping Weight
with pallet (lbs)
Unit Weight
without pallet (lbs)
009 207 152
012 207 152
015 246 188
018 282 222
024 296 236
030 343 280
036 344 281
042 394 329
048 410 374
060 436 394
070 501 432
Table 20. Unit weights EXH 0.75 to 6 tons
(Approximate)
EXH (60 Hz)
Shipping Weight
with pallet (lbs)
Unit Weight
without pallet (lbs)
009 297 173
012 297 173
Table 20. Unit weights EXH 0.75 to 6 tons
(Approximate) (continued)
EXH (60 Hz)
Shipping Weight
with pallet (lbs)
Unit Weight
without pallet (lbs)
015 297 173
018 393 269
024 393 269
030 458 313
036 458 313
042 560 381
048 560 381
060 613 434
070 613 434
Weight Distribution for Hanging
the DXH and EXH Model
WARNING
Improper Unit Lift!
Failure to properly lift unit in a LEVEL position could
result in unit dropping and possibly crushing
operator/technician which could result in death or
serious injury, and equipment or property-only
damage.
Test lift unit approximately 24 inches (61 cm) to verify
proper center of gravity lift point. To avoid dropping of
unit, reposition lifting point if unit is not level.
Approximate weight distribution for proper hanging of the
unit is indicated by weight distribution in the figure below.
Tolerance on the weights determined are ±15%.
Figure 15. Weight distribution DXH 2 to 6 tons; EXH
0.75 to 6 tons
To Next Page
Loading...
