Trane BACnet BCI2-C User Manual

Overview
6 RF-SVN006C-EN
Specifications, Requirements,
and Dimensions
The following table and illustration provides specifications,
requirements, and dimensions of the BCI2-C controller.
Table 1. Specification and requirements
Storage
Temperature: -44°C to 95°C (-48°F to 203°F)
Relative humidity: Between 5% to 95% (non-condensing)
Operating
Temperature: -40°C to 70°C (-40°F to 158°F)
Humidity: Between 5% to 95% (non-condensing)
Power: 24 Vdc ±15%, maximum load 90 mA
Altitude: 6,500 ft maximum (1,981 m)
Installation: U.L. 840: Category 3
Pollution: U.L. 840: Degree 2
Requirements
Tools and software:
• One (1) Phillips screwdriver
• One (1) 1/8 inch, flat-bladed service screwdriver
• CH530 Main Processor (MP) software: RTWD Version 6.30 or higher, RTAC Version 37.0 or higher,
CGAM version 2.00 or higher
• TechView 13.0 SP1 or higher
• Tracer TU 11.6 or higher

Trane BACnet BCI2-C Specifications

General

Brand	Trane
Model	BACnet BCI2-C
Category	Recording Equipment
Language	English