Trane ComfortLink XL850 - XL850 1-Touch Preset Configuration; Setting Preset Temperatures (Home, Away, Sleep)

page 18 850 User Guide
1-Touch Presets provide predetermined Heating
and Cooling Set Points for Home, Away and Sleep
time periods.
NOTE: 1-Touch Presets require Scheduling to be
disabled. To disable Scheduling, go to HOME >
MENU > SCHEDULES > DISABLE SCHEDULE.
When scheduling is disabled, heating and
cooling set points are maintained indenitely.
When a temperature change is desired, the user
must manually adjust the XL850 Control to the
new setting.
Conguring 1-Touch Presets
1. To change the Cooling Set Point, press the
blue COOLING SET POINT to activate the
setting. The current System Mode indicator
will display blue wavy lines.
Use the UP and DOWN Arrows to adjust the
Set Point to the desired temperature.
2. To change the Heating Set Point, press the
red HEATING SET POINT area to activate
the setting. The current System Mode
indicator will display red wavy lines.
Use the UP and DOWN Arrows to adjust the
Set Point to the desired temperature.
Conguring 1-Touch Presets
82º
62º
Away
Away
Away Preset
Temperatures
$
Home
Sleep
Press to
increase active
set point
Press to
decrease active
set point
Cooling Set Point
(press to change)
Press Away, Home
or Sleep to adjust
presets
Heating Set Point
(press to change)
Indicates current
mode
Navigate to Conguring 1-Touch Presets by pressing:
Home Screen > Menu > Settings > 1-Touch Presets
3. Repeat the process for Home and Sleep
settings.
4. Press APPLY, then HOME to return to the
Home Screen.
NOTE: When Scheduling is enabled, only the
Away preset is available and can be used for
energy savings.