page 28 850 User Guide
Alternatively, your XL850 allows you to add Z-Wave
devices using the Nexia app on your mobile device.
Adding Z-Wave Devices
1. Start the Nexia app.
2. Press the menu button in the top left corner.
3. At the bottom of this slide out menu, press
Connect New Device.
4. Select Z-Wave Device.
5. When prompted, prepare the device to be
added to the Z-Wave network by following
the device manufacturer’s instructions to
put device into add mode. You will have four
minutes to complete this process.
Adding Z-Wave Devices (via mobile app)
To Next Page
Loading...
