Trane E50 Series - BACnet Object Type Details; Analog Input (AI) Object Details; Analog Value (AV) Object Details; Binary Input (BI) Object Details

26
BAS-SVX076C-EN
• Optional Properties Supported: Max_Requestor, Max_Info_Frames, Description,
Location, Local_Time, Local_Date Writable Properties: Object_Identifier, Object_Name,
Max_Requestor, Location Property Range Restrictions: Object_Identifier – May only
write values from 1 to 4,193,999; Location – (limited to 64 characters); Max_Requestor
– May only write values from 1 to 127
– Analog_Input Objects
• Optional Properties Supported: Description, Reliability No Writable Properties
– Analog_Value Objects
• Optional Properties Supported: Description, Reliability
• Writable Properties: Only the Present_Value is writable
• Property Range Restrictions
• AV1: May only write 30078, 21211, 21212 and 16498
• AV2: May only write 10, 11, 12, 31 and 40
• AV3: May only write values from 5 to 5000
• AV4: May only write value 32768
• AV5: May only write values from 0.01 to 320.0
• AV6: May only write values such that AV6/AV5 is from 82 to 660 (absolute range is
82-32000). To ensure AV6 accepts/rejects the proper values, set AV5 first.
• AV7: May only write values 0 and 1
• AV8: May only write values from 1 to 99
• AV9: May only write values from 1 to 99
• AV10: May only write values from 1 to 6
• AV11: May only write the value 0 or a value from 1000 to 3276700 in multiples of
100
• Binary_Input Objects
• Optional Properties Supported: Description, Reliability
• No writable properties
• Data Link Layer Options
– EIA-485 Token Passing, Requestor (Clause 9), Baud Rate(s): 9600, 19200, 38400, 76800,
115200.
• Device Address Binding
– Static device binding is not supported. No client functionality is included.
• Networking Options
– None
• Character Sets Supported
– ANSI X3.4
BACnet Programming Objects
The following tables provide information about BACnet object types and descriptions.
Legend:
• R = Read, R/W= Read or Write
• NV= Value is stored in non-volatile memory. The value(s) is still available in the event of
power loss or reset.
• Units= Lists the physical units that a register holds.
BBAACCnneett PPrrooggrraammmmiinngg