EasyManuals Logo

Trane IntelliPak Signature Series User Manual

Trane IntelliPak Signature Series
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background image
SCXF-SVX01B-EN 7
2 = Protective Coating
3 = Protective Coating w/ Finish Coat
Digit 23 - Future Use
0 = None
Digit 24 - Unit Connection
1 = Disconnect Switch
2 = Terminal Block
3 = Dual Point Power (2 Blocks)
Digit 25 - Industrial Options
A = Protective Coated Evaporator Coil
B = Silver Solder
C = Stainless Steel Screws
D = A and B
E = A and C
F = B and C
G = A, B, and C
0 = None
Digit 26 - Drain Pan Type
A = Galvanized Sloped
B = Stainless Steel Sloped
Digit 27 - Waterside Economizer
A = Mechanical Clean Full Capacity
(4-row)
B = Mechanical Clean Low Capacity
(2-row)
C = Chemical Clean Full Capacity
(4-row)
D = Chemical Clean Low Capacity
(2-row)
0 = None
Digit 28 - Ventilation Control
B = Airside Econ w/ Traq
Damper
(Top O/A)
C = Airside Econ w/ Standard
Damper (Top O/A)
E = Airside Econ w/ Traq
Damper and
Comparative Enthalpy (Top O/A)
F = Airside Econ w/ Standard Damper
and Comparative Enthalpy (Top O/A)
H = 2-Position Damper Ventilation
Interface
J = Airside Economizer Interface
K = Airside Economizer Interface w/
Comparative Enthalpy
Digit 29 - Water Piping
D = Left Hand Basic Piping
F = Left Hand Intermediate Piping
K = Left Hand Basic w/ Flow Switch
M = Left Hand Intermediate w/ Flow
Switch
0 = None
Digit 30 - Condenser Tube Type
A = Standard Condenser Tubes
B = 90/10 CuNi Condenser Tubes
0 = None (Air-cooled Only)
Digit 31 - Compressor Service Valves
1 = With Service Valves
0 = None
Digit 32 - Miscellaneous System Control
1 = Timeclock
2 = Interface for Remote HI (IPCB)
3 = Dirty Filter Switch
4 = 1 and 2
5 = 1 and 3
6 = 2 and 3
7 = 1, 2 and 3
0 = None
Digit 33 - Control Interface Options
A = Generic BAS Module (GBAS)
B = Ventilation Override Module (VOM)
C = Tracer Comm. Interface Module (TCI)
D= Remote Human Interface (RHI)
E= GBAS and TCI
F= VOM and TCI
G = GBAS and VOM
H = GBAS and RHI
J = VOM and RHI
K = TCI and RHI
L = GBAS, VOM, and TCI
M = GBAS, VOM, and RHI
N = GBAS, TCI, and RHI
P = VOM, TCI, and RHI
R = GBAS, VOM, TCI, and RHI
0 = None
Digit 34 - Agency
T = UL Agency Listing
0 = None
Digit 35 - Filter Type
1 = Construction Throwaway
2 = Med Eff. Throwaway
Digit 36 - Miscellaneous Control Option
A = Low Entering Air Temp. Protect
Device (LEATPD)
B = High Duct Temp T-Stat
(Ship Separate)
C = Plenum High Static Switch
(Ship Separate)
E = A and B
F = A and C
H = B and C
L = A, B, and C
0 = None
P S W F S A 1 1 0 AO
1 2 3 4 5 6 7 8 9 10 11
Self-Contained Ship-With Accessory Model Number Description
Digit 1 - Parts/Accessories
P = Parts/Accessories
Digit 2 - Unit Model
S= Self-Contained
Digit 3 - Shipment
W = With Unit
Digit 4 - Development Sequence
F = Signature Series
G = Modular Series
Digit 5 - Sensors and Other Accessories
S = Sensors
Digit 6 - Sensors (Field Installed)
A = BAYSENS017 - Zone Temp Only (CV
and VAV)
B = BAYSENS013 - Zone Temp with
Timed Override Button (CV and VAV)
C = BAYSENS014 - Zone Temp with
Timed Override Button, Setpoint Dial
(CV and VAV)
E = BAYSENS008 - CV Zone Sensor
F = BAYSENS010 - CV Zone Sensor with
Indicator Lights
G = BAYSENS019 - CV Programmable
Night Setback Sensor
H = BAYSENS021 - VAV Zone Sensor
with Indicator Lights
J = BAYSENS020 - VAV Programmable
Night Setback Sensor
K = Remote Sensor Kit
L = Outside Air Temperature Sensor Kit
M = Outside Air Humidity Sensor Kit
0 = None
Digit 7 - Low Entering Air Temperature
Protection Device (Field Installed)
1 = Low Entering Air Temperature
Protection Device
0 = None
Digit 8 - Carbon Dioxide Sensor (fieldin-
stalled)
1 = Carbon Dioxide Sensor Kit
0 = None
Digit 9 - Not Used
0 = None
Digit 10, 11 - Design Sequence
A0 = A Design
Installation
General
Information

Table of Contents

Other manuals for Trane IntelliPak Signature Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Trane IntelliPak Signature Series and is the answer not in the manual?

Trane IntelliPak Signature Series Specifications

General IconGeneral
BrandTrane
ModelIntelliPak Signature Series
CategoryAir Conditioner
LanguageEnglish

Related product manuals