5.
ELECTRONIC
AND INTEGRATED
DEHUMIDIFICATION
IN THE
MICROPROCESSOR
CONTROL
GB
JUPITER units control and optimize dehumidification by operating on two control parameters which guarantee that the
dehumidification process is carried out with a constant air flow without partializing the evaporating coil. This aspect
enables the air distribution to be optimized within the room and for it not to be disturbed during the dehumidification stage.
This system enables, therefore, hot spots to be avoided during the various operating stages. In this way dehumidification
is carried out by making use of the complete surface of the evaporating coil therefore treating all of the air which passes
through it, with a shorter duration dehumidification cycle and a consequent increase in efficiency of the unit.
To Next Page
Loading...
Need help?
General
