Trane Symbio 700 - Mobile Application; Symbio Service App Capabilities; Supported Communication Protocols for App

ACC-APG001A-EN
11
Blue LED
Display Description
Press for On/Off
Off NOT CONNECTED Bluetooth Off
Blinking
WAITING... Bluetooth On — Not Paired
On Solid CONNECTED
Bluetooth On — Connected/
Paired
Figure 4. Symbio 700 Bluetooth status
4. Start the mobile app on your smart device.
5. On the login screen, press SSkkiipp in the lower right-hand corner of the screen. Or Trane
personnel can login using their Trane Connect username and password.
6. On the Unit List page, select the Symbio 700 controller that you want to pair with. If the
controller is not listed, press the refresh arrow in the upper right-hand corner of the screen.
7. When prompted, pair the app to the Symbio 700 controller. A popup message displays a 6-
digit random number. The same number is shown on the display of the Symbio 700
controller until the pairing is complete, allowing the user to confirm connection to the
intended controller.
Figure 5. Bluetooth pairing
8. PPrreessss oonn tthhee SSyymmbbiioo 770000 oonn--bbooaarrdd kkeeyybbooaarrdd//ddiissppllaayy ttoo ccoommpplleettee tthhee ccoonnnneeccttiioonn..
SSyymmbbiioo 770000 OOvveerrvviieeww