Figure 21. LTE modem wiring, ref. 50712738
Installation
24 CVRF-SVN005C-EN
Communication Device Mounting
There devices are intended to be mounted on polycarbonate
boxes. There are two installation approaches:
1. Each device is mounted independently on a small box
(018
5-0426-0100).
2. Multiple devices are mounted on a large box (0185-0427-
0
100).
All devices connect Symbio™ 800 by standard USB or
Mod
bus cable. For installation standard application need to
field drill a 1.09-inch hole on side of box for a snap bushing.
This bush can be replaced as field straight connector and
conduit (3/4-inch size) as NEMA 4 applications.
The boxes have magnets for flexible attachment to the
Symbio
™ panel.
Figure 22. Device mounting
The single box is 7-inch Long x 5-inch Wide x 5-inch height
Figure 23. Boxes
Figure 24. Box mounting
The triple box is 15.5-inch Long x 6-inch Wide x 4-inch height.
1A22 SYMBIO800 UNIT CONTROLLER
ETHERNET
USB
1324
LON
1K47
INTERFACE
TRACER
OPTIONAL
COMMUNICATIONS
LTE
4Y2
MODEM
OPTIONAL
12
To Next Page
Loading...
