Installation
CVRF-SVN005C-EN 23
bottom of Wi-Fi module and USB-A side to any one of the
four USB ports under the Symbio™ 800 controller.
Figure 17. Wi-Fi wiring, ref. 50712738
Air-Fi Installation
Refer to BAS-SVX040*-EN for more information. Mounting
and wiring of Air-Fi module (0185-0424-0100).
1. Drill a 0.87-inch holes on the top of polycarbonate box,
ali
gn this hole with thread hole on the module, and securely
fasten the Air-Fi module by M4 screw.
2. Connect Air-Fi module to Symbio™ 800 by Modbus
cable.
3. Remove the cover of module, connect 4 wires cable into 4
wire conn
ector and plug in Air-Fi module, connect other
side of cable into two 2 wire connectors and plug them into
the Symbio™ 800 controller IMC terminal.
Figure 18. Connecting wiring harness
Figure 19. Wiring harness connection
Figure 20. Air-Fi wiring, ref. 50712738
LTE Modem Installation
Modem part is MOD03184, MODULE; CELLULARLE USB 2.9
METER CABLE. Refer to provided literature for setup and
operation details.
1. Drill a 1.36-inch holes on the top of polycarbonate box,
se
curely fasten the LTE modem by gasket and nut which
provided by modem.
2. Connect LTE modem to Symbio™ 800 by USB cable which
p
rovide by module, plug USB MICRO-B side to bottom of
LTE modem and USB-A side to any one of the four USB
ports under the Symbio™ 800 controller.
+24
G
-
+
IMC
RED
BLK
GRN
WHT
RED
BLK
BLU
GRY
VDC
+24
G
-
+
MACHINEBUS
VDC
P3
-
+
BACKNET
P1
-
+
-
+
MODBUS
P2
G
IMC
B
IMC
A
1A22 SYMBIO800 UNIT CONTROLLER
SERVICE
ETHERNET
12
USB
1324
TOOL
WI-FI
4Y1
ANTENNA
OPTIONAL
WHT
GRN
BLK
LTE
4Y2
MODEM
OPTIONAL
RE
+24
G
-
+
IMC
RED
BLK
GRN
WHT
RED
BLK
BLU
GRY
VDC
+24
G
-
+
MACHINEBUS
VDC
P3
-
+
BACKNET
P1
-
+
-
+
MODBUS
P2
G
AIR-FI
4K48
INTERFACE
OPTIONAL
IMC
B
IMC
A
1A22 SYMBIO800 UNIT CONTROLLER
SERVICE
ETHERNET
12
USB
1324
TOOL
WHT
GRN
BLK
1X3-1
1X3-2
1X3-3
BLK
BLU
RED