Figure 52. Existing UCP2 wires to be discarded
Figure 53. Starter sub panel customer connections 5071-0496
Starter Work
38 CVRF-SVN005C-EN
Notes:
• Be sure to refer to the wiring diagrams listed in “Wiring
Diagram Matrix,” p. 46 as you review the following
instructions. The
wire numbers and component
designations indicated in these steps appear in these
figures. Actual existing numbers may vary for your unit.
Service literature that includes sample original unit wiring
can be found in CVHE-M-7 or CVHE-IN-8.
To Next Page
Loading...
