84
TK 55676-19-IM-EN
dEL will display
Press confirmation button again to confirm deletion.
The fault memory is deleted and the control box is unlocked.
Continue with Heater Start-Up or Diagnosis.
QQuuiitt SSttaarrtt--UUpp
Switch Off Heater
Press confirmation button, heater is switched off.
PPeerrffoorrmm tthhee DDiiaaggnnoossiiss AAggaaiinn
Press activation button, display is activated.
UUnnaabbllee ttoo PPeerrffoorrmm tthhee DDiiaaggnnoossiiss
Automatic detection was unsuccessful.
Display if the automatic detection was not successfully completed.
Possible causes:
• Diagnostic harness not connected to heater harness
• Adapter plug not seated in diagnostic harness
• Defective diagnostic cable
• Defective heater.
HHeeaatteerr SSttaarrtt--UUpp PPrroocceedduurreess
To Next Page
Loading...
