TK 55676-19-IM-EN
83
Clearing Faults
DDiissppllaayy ccuurrrreenntt ffaauulltt iinn ffaauulltt mmeemmoorryy
Simultaneously press the backward and forward control buttons to display active
or current faults in memory.
Display: e.g. AF: 12
Display fault memory F1 – F5
Press either the backward or forward control buttons to display any faults in
memory.
Display: e.g. F1: 20
Record all fault codes. Refer to the diagnostic manual for an explanation of fault
code diagnosis.
Display current fault in fault memory again.
Simultaneously press the backward and forward control buttons to display active
or current faults in memory.
Display: e.g. AF: 12
Delete the fault memory and as a result, at the same time cancel the control box
lock.
Current fault or fault F1 – F5
Press confirmation button to clear all faults and cancel control box lock.
HHeeaatteerr SSttaarrtt--UUpp PPrroocceedduurreess
To Next Page
Loading...
