FM Region: Change the FM broadcast frequency band. If you live in the Japan region, set
the FM Region to “Japan.” For all other countries (87.5 MHz – 108.0 MHz), “World” should
be used.
Adjusting the Volume
1. Select the Volume icon ( ) in the OSD to access the volume controls.
2. Press volume up
or volume down
to increase or decrease volume.
3. Press mute
to temporarily turn off the Photo Frame’s audio output. Press the mute button
again to restore audio to normal.
4. Alternatively, the volume and mute functions can be accessed directly with the remote control.
Note:
•
To improve FM reception, extend the FM antenna wire to its full length and point it in the
direction that gives the strongest signal. Signal strength may also depend on the location of
your home.
•
We recommend performing an Auto Scan the first time you use the Radio, and then adjusting
the Saved Stations list to your preference.
To Next Page
Loading...
