- 5 -
that the proper power option is installed for the power to be used. This meter has no AC
(mains) switch. It will be in operation as soon as power is connected.
The 85-264 Vac mains connector (P1 Pins 1-3) is colored Green to differentiate it from
other input and output connectors. The 12-32 Vac (10-48 Vdc) mains connector is colored
Black.
Do not make signal wiring changes or connections when power is applied to the instru-
ment. Make signal connections before power is applied. If reconnection is required,
disconnect the AC (mains) power before such wiring is attempted.
To prevent electrical or fire hazard, do not expose the instrument to excessive moisture.
Do not operate the instrument in the presence of flammable gases or fumes; such an
environment constitutes a definite safety hazard.
This meter is designed to be mounted in a metal panel. Verify the panel cutout dimen-
sions, and mount according to instructions.
Symbols applicable to this product:
ETL Mark. Indicates that product conforms to UL Std. 61010-1 and is certified
to CAN/USA Std. C22.2 No. 61010-1
CE Mark. Indicates that product meets EU safety, health and environmental
requirements.
Caution (refer to accompanying documents)
Caution, risk of electric shock.
Equipment protected throughout by double insulation or reinforced insulation.
Both direct and alternating current.
RoHS Symbol. Indicates that product is free from hazardous substances defined
in EC directive 2002/95/EC.
WEEE Symbol. Indicates that product should be recycled and not disposed of as
general waste.
Operating environment:
The meter is Class II (double insulated) equipment designed for use in Pollution degree 2.
To Next Page
Loading...
Need help?
General
