EasyManua.ls Logo

Travis Industries DVS GSR Insert - Features & Specifications; Features; Installation Options; Heating Specifications

Default Icon
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 Features and Specifications
© Travis Industries 4090812 100-01232_001
Features
- Ember Fyre™ Burner for "Wood Fire" Look
- Works During Power Outages (battery backup system)
- Blower and Remote Control Included
- Standing or Intermittent (GreenSmart) Pilot
- Convenient Operating Controls
- Variable-Rate Heat Output
- Accent Light
Installation Options
Residential or Mobile Home
Fireplace Insert
Masonry or Factory Built (Metal) Wood-
Burning Fireplace
Heating Specifications
Natural Gas Propane
Approximate Heating Capacity (in square feet)* 500 to 1,500 500 to 1,500
Maximum BTU Input Per Hour 31,000 31,000
* Heating capacity will vary with floor plan, insulation, and outside temperature.
Dimensions
18"
See the section "Vent Requirements"
for vent location.
1-1/4"*
19-1/2"
26-1/2"
15-1/8"
37-1/8"* 4x6 Panels
40-3/8"* 8x10 Panels
44-3/8"* 10x13 Panels
25"*
4x6 Panels
28-7/8"*
8x10 Panels
31-7/8"*
10x13 Panels
Weight:
115 Lbs.
* Includes trim
NOTE: on older style panels the 3/8" standoffs
are no longer required and may be bent back.
Electrical Specifications
Electrical Rating ............................................................. 115 Volts, 1.5 Amps, 60 Hz (180 watt)
Fuel:
This heater is shipped in natural gas (NG) configuration but may be converted to propane (LP) using
a conversion kit. The sticker on top of the gas control valve will verify the correct fuel.