Instruction manual 7
TREASUREHUNTER3D
Makes underground treasures visible
Before starting to use a DroneRover sensor device you
need to learn how to use Phantom 4 drones� We highly
recommend to visit DJi ocial link:
https://www�dji�com/si/phantom-4/info
and follow these video instructions�
• Unboxing Part 1-5
• Pre Flight Part 1-3
• How To Fly Part 1-5
• Phantom 4 Tutorials - Updating Firmware
This video will give you all the information that is
required to understand before starting to use a
DroneRover sensor device�
Here is a short checklist of things that you need
to know before continuing:
• How to charge drone batteries
• How to properly assembly and prepare
drone for the ight
• How to turn on Remote controller and drone
• How to use DJi go 4 app to upgrade drone
rmware and calibrate drone compass
(https://www�dji�com/si/downloads/djiapp/dji-go-4)
• How to safely take off, y and land
the drone
IMPORTANT NOTICE!
If you are not sure about things on this checklist please do not start using a DroneRover sensor or
app since you might harm yourself, others or the drone & sensor itself� TreasureHunter 3D does not
take any responsibility for the improper use of the device�
Learn how to use Phantom 4
To Next Page
Loading...