Mode
Set
Scroll
1. Cycle •Mode to SPEED.
2. Hold Set•.
The wheel selection icon appears.
3. Cycle Set• to a wheel:
• Wheel 1 is a circle
• Wheel 2 is a circle inside a semi-circle
4. Push Scroll to select.
A number representing tire size appears.
5. Cycle Scroll to the 4-digit number (e.g. “2155”).
6. Push Set•.
The first digit flashes.
7. Cycle Scroll to your preferred setting:
• 0, 1, or 2
8. Push Set• to choose your setting.
The second digit flashes.
9. Repeat until you have selected your preferred 4-digit number.
10. Push •Mode to return to the SPEED screen.
The computer returns to SPD.
To Next Page
Loading...
