Mode
Set
Scroll
The ACH altimeter allows you to view your
climbing total for a trip, and also calculates
your total, like total distance. The display units
correspond with the distance units set for the
odometer: FT or M (Figure 27).
When you restart the computer, your total will
return to 0. You can manually set the total (TTL).
1. Cycle •Mode until ALTITUDE appears.
2. Cycle Scroll until the desired datum
appears
• TTL- total altitude gain since ReSet
• CUR- current altitude
• TRP- altitude gain since last ReStart
• MAX- maximum altitude
1. Cycle •Mode to ALTITUDE.
2. Cycle Scroll to CUR.
To Next Page
Loading...
