NX-Platform Hardware Installation and Safety 37
Specification Description
Dimensions 2RU - 3.41 in x 16.84 in x 22 in (8.67 cm x 42.78 cm x 55.88 cm)
Weight 42 lbs (19.05 kg)
Power Requirements
• AC: Voltage 100 – 240; Current 12 – 6; Frequency 50/60 Hz
• DC: Voltage -40 to -60; Current 24 – 16; SELV
The device’s maximum power consumption is 750 W.
Service Provider operating
requirements:
• Temperature
32 to 104° F (0-40° C) — Operating -4 to 158° F (-20 to 70° C) —
Storage
• Altitude
No degradation up to 10,000 feet (3048 m)
• Humidity
5% to 95% (non-condensing)
External interfaces
• 1x1GbE copper management port
• 1x1 RJ-45 console port
• 1 external storage card drive
Data port interfaces vary depending on the installed I/O modules. See
I/O modules on page 26.
Note: The pluggable transceiver ports do not include SFP, SFP+, or QSFP+ transceivers.
Software specifications
Provides software specification considerations.
To connect to and configure the TippingPointNX-Platform IPS, you must have a network-connected PC
that supports Internet Explorer 7 and up, Firefox 1.5+, Mozilla 1.7+, or Netscape 8.1+.
To Next Page
Loading...
