Trend Micro TippingPoint NX-Platform - Tippingpoint NX-Platform Device Overview; Chassis Overview

20 NX-Platform Hardware Installation and Safety
TippingPoint NX-Platform device overview
This topic describes the components, chassis, requirements, and installation of the TippingPointS2600NX/
S5200NX/S6200NX/S7100NX/S7500NX devices and their components.
These devices are associated with the following part numbers:
Model HPE part number Trend Micro part number
TippingPointS2600NX JC874A TPNN0026
TippingPointS5200NX JC824A TPNN0029
TippingPointS6200NX JC873A TPNN0031
TippingPointS7100NX JC644A TPNN0034
TippingPointS7500NX JC872A TPNN0037
Prior to installation, you should also obtain the IPS Command Line Interface Reference. After installing the
components, complete the TippingPoint Setup Wizard as part of the installation and configuration
procedures.
This topic includes the following information:
• Chassis overview on page 20
• I/O modules on page 26
• Model requirements on page 35
• Technical specifications on page 36
• Hardware installation and configuration on page 38
Chassis overview
Provides images and an overview of the NX-Platform IPS devices.
The TippingPointNX-Platform is rack-mountable on a 19- or 23-inch rack and accommodates up to four
I/O modules, enabling the user to customize the device to suit the needs of the network. See I/O modules
on page 26 for more information about the available module types.