© Copyright 2011 TRENDnet. All Rights Reserved.
3
TRENDnet User’s Guide
TE100-MFP1
Side View (Left)
• Power Port – Connect the included power adapter from your router power
port and to an available power outlet.
Note: Use only the adapter that came with your router.
• On/Off Power Switch – Move the On/Off switch to power “On” (Left position)
or “Off” (Outer position) the device.
• Reset Button – Push and hold this button for 15 seconds and release to reset
the device to its factory default setting.
Application Diagram
The print server allows you to share your regular printer or multi-function printer
through a network. It is typically placed in the same location of your printer or multi-
function printer. In addition to its print server functionality the TE100-MFP1 can also
allow you to share USB storage devices over the network.
To Next Page
Loading...
Need help?
General
