Access Point Setup
Access Control
This feature can be used to block access to your LAN by unknown or untrusted wireless
stations.
Click Access Control on the menu to view a screen like the following.
Figure 8: Access Control Screen
Data - Access Control Screen
Enable
Use this checkbox to Enable or Disable this feature as desired.
Warning ! Ensure your own PC is in the "Trusted Wireless Stations"
list before enabling this feature.
Trusted Stations
This table lists any Wireless Stations you have designated as
"Trusted". If you have not added any stations, this table will be empty.
For each Wireless station, the following data is displayed:
• Name - the name of the Wireless station.
• MAC Address - the MAC or physical address of each Wire-
less station.
• Connected - this indicates whether or not the Wireless station
is currently associates with this Access Point.
Buttons
Modify List
To change the list of Trusted Stations (Add, Edit, or Delete a Wireless
Station or Stations), click this button. You will then see the Trusted
Wireless Stations screen, described below.
Read from File
To upload a list of Trusted Stations from a file on your PC, click this
button.
Write to File
To download the current list of Trusted Stations from the Access Point
to a file on your PC, click this button.
13
To Next Page
Loading...
Need help?
General
