Access Point Setup
System Screen
Click System on the menu to view a screen like the following.
Figure 20: System Screen
Data - System Screen
Identification
Access Point
Name
Enter a suitable name for this Access Point.
Description
If desired, you can enter a description for the Access Point.
Country Domain
Select the country or domain matching your current location.
IP Address
DHCP Client
Select this option if you have a DHCP Server on your LAN, and you
wish the Access Point to obtain an IP address automatically.
Fixed
If selected, the following data must be entered.
• IP Address - The IP Address of this device. Enter an unused IP
address from the address range on your LAN.
• Subnet Mask - The Network Mask associated with the IP Address
above. Enter the value used by other devices on your LAN.
• Gateway - The IP Address of your Gateway or Router. Enter the
value used by other devices on your LAN.
• DNS - Enter the DNS (Domain Name Server) used by PCs on
your LAN.
35
To Next Page
