TRENDnet TEW-753DAP - IP Address Configuration; Static and DHCP IP Settings

TEW-753DAP User’s Guide System Conguration
© Copyright 2013 TRENDnet. All rights reserved.
21
IP Sengs
The TEW-753DAP has a stac IP (192.168.10.100) set for management
purposes. You can change this IP address to t your network plan or
manage mulple TRENDnet access points. You can also set the TEW-
753DAP to DHCP client to accept an IP dynamically.
IP Network Seng : Select “Obtain an IP address
automacally (DHCP)” or “Specify
an IP address”. If you select specify
an IP address, you have to enter the
following informaon manually. If
DHCP is selected, then the IP address
is received automacally from the
external DHCP server.
IP Address : Specify an IP address
IP Subnet Mask : Specify a subnet mask for the IP
address
Default Gateway : Default route for the TEW-753DAP
Primary DNS : Primary DNS server address
Secondary DNS : Secondary DNS server address
Use Link Local Address : Check this to use link local address
IPv6 IP Address : Specify an IPv6 dual-stack address
IPv6 Subnet Prex
Length :
Specify a subnet range for the IPv6
address
IPv6 Default Gateway : Default route for IPv6
IPv6 Primary DNS : Primary IPv6 DNS server address
IPv6 Secondary DNS : Secondary IPv6 DNS server address