TRENDnet TEW-753DAP - Page 51

TEW-753DAP User’s Guide System Conguration
© Copyright 2013 TRENDnet. All rights reserved.
49
CLI Sengs
To enable the Command Line Interface for batch management or
advanced conguraon, select CLI ON and then click Save/Apply�
Access the CLI interface using SSH with the administrator user name
and password. For example (in Linux):
$ ssh admin@192.168.10.100
The authenticity of host ‘192.168.10.100
(192.168.10.100)’ can’t be established.
RSA key ngerprint is b2:41:6e:0f:4b:2a:f3:03:18:60:
0b:c4:eb:74:9d:9c.
Are you sure you want to continue connecting (yes/
no)? yes
admin@192.168.10.100’s password:
*** Hi admin, welcome to use cli(V-1.7.6) ***
---========= Commands Help =========---
stat -- Status
sys -- System
wless2 -- 2.4G-Wireless
wless5 -- 5G-Wireless
mgmt -- Management
tree -- Tree
help -- Help
reboot -- Reboot
tew-753dap>
Log
To keep your system operang history, you can setup local and remote
loggings.
Syslog
Select Enable from the drop down list and then enter the
log server IP address or URL. Then click Save/Apply to
save the log to the log server.
Local Log
Select Enable from the drop down list and then click Save/
Apply to save the log locally. You can view the log in Status
> System Log