TRENDnet TV-IP201P - Video Resolution; Frame Rate; Flip Image

39
Light Frequency
Select 60HZ or 50HZ.
Video Resolution
Select the desired video resolution from three formats: 176x144,
320x240, and 640x480. The higher resolution will produce better
image quality; however, it will use more resource within your
network.
Compression Rate
Select the desired compression rate from the five levels: Lowest,
Low, Medium, High, and Highest. The higher compression rate
can increase the data transmission speed over the network;
however, it will produce poorer image quality.
Frame Rate
Select the optimal setting depending on your network status.
Please note that the higher setting can produce better image
quality; however, it will use more resource within your network.
The available settings are 1, 3, 7, 12, 15, 25 and 30.
Flip Image
Select Horizontal to display the image in a horizontal mirror
mode. Select Vertical to display the image in a vertical mirror
mode.
Audio
Select PCM or ADPCM. Adjust the Volume of the camera by
pressing +1 or -1.