TRENDnet TV-IP201P - Access Control

45
Enable Trigger Email
- SMTP Server Address: To use the e-mail alert function, you
must enter the mail server address in the field.
- Sender e-mail Address: Enter the e-mail address of sender.
- Receiver e-mail Address 1/2: Enter the e-mail address of
receiver(s).
- User Name: Enter the user name in this field to login to the
sender’s mail server.
- Password: Enter the user password in this field.
- Sending Interval: Enter the time interval to send next e-mail;
the unit is in seconds.
- Sending Times: Enter the sending times for every e-mail
alert.
- Send a test e-mail: When completed, you can do a test to
confirm the related settings by checking this option.
Trigger Output
Check the item to enable the camera to receive the signal from
specified detection area, and then enter the proper settings in the
Time Interval field.
Access Control
Click the Access Control
b
utton to bring up a dialog
window. This window contains
list of users, allowing the
administrator to assign legal
users who are permitted to
control the trigger output.