TRIMAX SNAKE S2 OPERATORS MANUAL
ENGLISH EDITION
©Trimax Mowing Systems (NZ) Ltd
www.trimaxmowers.com 26 27 March 2019
f. The chains should pass underneath the mower tow hitch and
be adjusted for length to prevent the trailer’s drawbar hitting the
ground if the mower is detached from the tractor.
g. The tow hitch must be able to articulate freely without the
chains fouling any parts on the tractor drawbar or tow hitch.
Move the tow hitch from its extreme left and right positions to
ensure free movement.
h. Remove the chains and tow hitch from the tractor.
i. Excess chain can be removed if desired.
j. Refit the tow hitch to the mower. Ensure the tow hitch is the
right way up.
9. Mount the Remote Unlock (if fitted):
a. The Remote Unlock controller must be fitted to the tractor
where the operator can easily reach it while driving and operating
the auxiliary hydraulic valves. This could be on the dashboard or
the right-side cab window or mudguard, for example, where the
connecting cable will not be snagged or tripped over.
b. Attach the controller to a flat surface using the industrial
strength Velcro supplied. Once the location has been decided,
thoroughly clean the mounting surface, peel the backing off the
Velcro and stick it firmly onto the surface. Allow the adhesive to
cure for 24 hours before attempting to remove the control unit.
To Next Page
Loading...
Need help?
General