Trimble R1 User Manual

Contents
Safety Information 5
Use and care 5
Using an external antenna 5
Exposure to radio frequency radiation from Bluetooth transmitters 5
1 Introduction 7
What is the R1 GNSSreceiver 8
What's in the box 9
Accessories 9
Supported software 9
Related information and technical support 9
2 Using the R1 GNSSreceiver 11
Parts of the receiver 12
Charging the battery 12
Turning on and turning off the receiver 13
LEDstatus information 14
Connecting the R1 GNSSreceiver to a device 15
Using the R1 GNSSreceiver with GIS software on Windows Embedded Handheld and
Windows devices 16
Using the GNSSStatus utility 16
Using an external antenna 18
3 Troubleshooting 19
Receiver won't turn on 20
Battery indicator for R1 GNSSreceiver shows empty on an iOS device 20
R1 GNSSreceiver firmware upgrade 20
Incorrect R1 GNSS receiver name showing in Bluetooth settings on iOS device 21
Glossary 22
Trimble R1 GNSS Receiver User Guide 6

Trimble R1 Specifications

General

Receiver Type	GNSS
GNSS Signals Tracked	GPS, GLONASS, Galileo, BeiDou, QZSS
Channels	44
SBAS	Yes
Data Logging	Yes
Bluetooth	Yes
Wi-Fi	No
Weight	187 g (6.6 oz)
Operating Temperature	-20 °C to +60 °C (-4 °F to +140 °F)
IP Rating	IP65
Connectivity	Bluetooth
Dimensions	11.2 cm x 6.8 cm x 2.7 cm (4.4 in x 2.7 in x 1.1 in)