2 Using the R1 GNSSreceiver
l On a device powered by the Windows 7 or 8.x operating system, Windows Embedded
Handheld 6.5, or Android versions 4.1.x or later, use the GNSSStatus utility to connect with the
receiver:
a.
Tap GNSSStatus to launch the GNSSStatus utility.
b. Tap the R1 [ID] at the bottom of the screen to bring up the Select Receiver list. Tap the
device [R1 ID] you want to reconnect to. Tap the connection icon to the right of the
receiver IDto connect to it.
l On an iPhone or iPad, go to Settings / Bluetooth, and tap the R1 [ID] device you want to
connect to.
See Using the GNSSStatus utility, page 16 for more information.
Using the R1 GNSSreceiver with GIS software on
Windows Embedded Handheld and Windows devices
If you are using Trimble GIS software (for example, TerraSync software, Trimble Positions software,
or the GPSPathfinder Field toolkit) on devices powered by the Windows Embedded Handheld or
Windows Desktop operating systems, you do not need to install the GNSSStatus utility, unless you
want to install an option (subscription service) that you have purchased (see Receiver options, page
17). You can connect to the R1 GNSSreceiver from within the software when the receiver is in
Bluetooth pairing mode, as with other Trimble GIS external receivers.
Using the GNSSStatus utility
Download the GNSSStatus utility for your device:
l for Windows, Windows Embedded Handheld, go to the product downloads page on
www.trimble.com
l for Android, go to Google Play store and search for “GNSS Status Utility"
l for iOS, go to iTunes app store and search for "GNSS Status Utility"
On your device, tap GNSSStatus to launch the GNSSStatus utility.
If the device you are using is not connected to a R1 GNSSreceiver, the GNSSStatus utility shows:
l Select new receiver enabling you to select a R1 GNSSreceiver to connect to
If the device you are using is connected to a R1 GNSSreceiver, the GNSSStatus utility Home screen
shows:
Trimble R1 GNSS Receiver User Guide 16
To Next Page
Loading...
Need help?
General
