8
Warranty and Service Contact Information
Country of Purchase Horizon Hobby Contact Information Address
United States
of America
Horizon Service Center
(Repairs and Repair Requests)
servicecenter.horizonhobby.com/RequestForm/
2904 Research Rd.
Champaign, Illinois
61822
USA
Horizon Product Support
(Product Technical Assistance)
productsupport@horizonhobby.com
877-504-0233
Sales
websales@horizonhobby.com
800-338-4639
European Union
Horizon Technischer Service service@horizonhobby.de
Hanskampring 9
D 22885 Barsbüttel
Germany
Sales: Horizon Hobby GmbH +49 (0) 4121 2655 100
FCC Information
TEP0014 FCC ID: 2BC7H-BPIN2
TEP0015 FCC ID: 2BC7H-BLE
This equipment complies with FCC and IC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and/or antenna and your
body (excluding fingers, hands, wrists, ankles and feet). This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.
Supplier’s Declaration of Conformity
Trinity MX8 Gen 2 Wireless 200A ESC (TEP0013)
Trinity MX8 Gen 2 Wireless 220A ESC (TEP0014):
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment & receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Horizon Hobby, LLC
2904 Research Rd., Champaign, IL 61822
Email: compliance@horizonhobby.com
HorizonHobby.com
Compliance Information for the European Union
CAN ICES-3 (B)/NMB-3(B)
TEP0014 IC: 31439-BPIN2
TEP0015 IC: 31439-BLE
This device contains license-exempt transmitter(s)/receivers(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following 2 conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
IC Information
EU Compliance Statement
Trinity MX10 Gen 2 Wireless 200A ESC (TEP0013)
Trinity MX8 Gen 2 Wireless 220A ESC (TEP0014): Hereby, Horizon
Hobby, LLC declares that the device is in compliance with the following:
2014/30/EU EMC Directive; EU Radio Equipment Directive 2014/53/EU; RoHS
2 Directive 2011/65/EU; RoHS 3 Directive - Amending 2011/65/EU Annex II
2015/863.
The full text of the EU declaration of conformity is available at the following
internet address: https://www.horizonhobby.com/content/support-render-
compliance.
EU Manufacturer of Record:
Horizon Hobby, LLC
2904 Research Road
Champaign, IL 61822 USA
EU Importer of Record:
Horizon Hobby, GmbH
Hanskampring 9
22885 Barsbüttel Germany
WEEE NOTICE:
This appliance is labeled in accordance with European Directive
2012/19/EU concerning waste of electrical and electronic equipment
(WEEE). This label indicates that this product should not be disposed of
with household waste. It should be deposited at an appropriate facility
to enable recovery and recycling.