Trinity Newton+ User Manual

Newton+ – Operational Manual
TRINITY
[1]
USER’S MANUAL
Newton+
AUTOMATIC POWER FACTOR CORRECTION RELAY
This document contains the latest technical information about Automatic Power
Factor Correction Relay, Newton+ which is a micro-controller based KVAR controller.
The product, Newton+ is sophisticated electronic equipment and, the user is advised
to read this User’s Manual carefully before attempting to install or operate the
equipment.
Published on: (mention the date of publishing)
Document Version: 1.0

Trinity Newton+ Specifications

General

Function	General Purpose
Mechanical Life	10, 000, 000 operations
Ambient Temperature	-40°C to +70°C
Contact Configuration	DPDT
Contact Rating	10A
Coil Voltage	5VDC, 12VDC, 24VDC, 48VDC
Electrical Life	100, 000 operations
Insulation Resistance	1000 MΩ (min) at 500VDC
Vibration Resistance	10-55Hz, 1.5mm

Summary

Introduction

System Considerations

System requirements and limitations for proper operation of the relay, including CT placement and voltage connections.

The Main Features Available in This System

Overview of the key functionalities and capabilities of the Newton+ device, such as LCD display and programmable settings.

Technical Specifications

Installation and Commissioning

Connection Scheme

Diagram illustrating the electrical connections for the Newton+ relay, including CT and voltage inputs.

Operational Details

Programming Mode

Details on configuring parameters like Control Action, CT ratios, delays, and bank stages for the Newton+ unit.

Run Mode

Explains operational status displays including voltage, current, power factor, KVAR, and active power.

Control Outputs

Trouble Shooting

Guidelines for diagnosing and resolving system faults related to the Newton+ relay, categorizing system issues.

Trouble Shooting Guide

A comprehensive guide to identify and fix common issues with the Newton+ relay, covering specific fault scenarios.