Trinity Newton+ User Manual

NEWTON+ – Operational Manual
TRINITY
[17]
2. Press
key. Immediately, P starts blinking which shows that the parameter
can now be changed. Set the desired Auto Sense by pressing
and
keys and then, press
key to confirm the parameter setting.
3. In case, your setting is completed, press
key for about 4 to 5 seconds to
return into Run Mode. Or press
and keys to specify for other
parameters such as above instructions.
AUTO
SENSE?
YES

Trinity Newton+ Specifications

General

Function	General Purpose
Mechanical Life	10, 000, 000 operations
Ambient Temperature	-40°C to +70°C
Contact Configuration	DPDT
Contact Rating	10A
Coil Voltage	5VDC, 12VDC, 24VDC, 48VDC
Electrical Life	100, 000 operations
Insulation Resistance	1000 MΩ (min) at 500VDC
Vibration Resistance	10-55Hz, 1.5mm