TINYPRO6 – Operational Manual
TRINITY
[14]
Run Mode
In the run mode, the various parameters calculated by the TINYPRO6 are displayed
on different pages on a three lines of 0.4” Red Seven Segment. There are ten
parameters which displays in different pages with the system values. Now the
displays can be altered and analyzed one by one.
Run Mode Displays
The Run mode displays will autoscroll by default and stay for each page with an
interval of 7 to 8 seconds.
Page 1
The LED indicator glows on VOLT which shows individual phase to phase voltage
of R-Y-B on first row, second row and third row display respectively.
Page 2
The LED indicator glows on AMPS with respect to L1, L2 and L3 which shows
individual phase current values of R-Y-B on first row, second row and third row
display respectively.
To Next Page
Loading...
Need help?
General
